ZebraLight SC51c
|
|
|
|
|
- Item #: ZSC51C
- Manufacturer: ZebraLight
ZebraLight SC51c Flashlight
LED:
- Philips LUXEON Rebel (Typical CRI 85, color temperature 4000K)
User Selectable Levels:
- 3 main levels (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
Light Output:
- High: H1 130 Lm (0.9 hrs) or H2 63 Lm (2.4 hrs) / 80 Lm (1.7 hrs) / 4Hz Strobe
- Medium: M1 29 Lm (10.5 hrs) or M2 14 Lm (26 hrs)
- Low: L1 2.8 Lm (3 days) or L2 0.3 Lm (16 days)
130, 80, 29, 14 and 2.8 Lumen output levels are current regulated. 63 and 0.3 Lumen output levels are PWM generated.
Operating Voltage Range:
- 0.7V - 2.5V
Battery:
- One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
Parasitic Drain:
- Negligible (equivalent to 16 years)
Beam Type:
- 80 degree spill beam spread
- 11 degree (3.8 feet at 20 feet) hot spot
Dimensions:
- Diameter:0.85 inch (22 mm)
- Length:3.15 inch (80 mm)
Weight:
- 1.3 oz (36.5 gram) with clip, without battery or headband
Features:
- Electronic soft-touch switch, with a 200,000 cycle operating life
- Smart user interface provides fast and easy access to all brightness levels
- Precision machined unibody casing from premium grade Alcoa aluminum bar stock
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
- Durable natural hard anodized finish (Type III Class I)
- Ultra clear lens with anti-reflection coatings on both sides
- Bezel down clip (pre-installed)
- Orange peel textured reflector
- Anti-roll and tail-standing capable
- Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8 (2 meters, 30 minutes)
